Product Categories
Need consultation?

This JKD-513COM is very popular in market and they are very stable in working situation during past few years testing by market.
CO+Smoke,CO only,Smoke only,All style we can customize for you.
The product is a smart carbon monoxide and smoke combo detector,adopts microprocessor control.the electrochemical carbon monoxide sensor is stable and reliable with low current consumption and small sensitivity drift.
Mostly used in the place of carbon monoxide gas leakage and fire place, well guarantee personal safety.
1.FIRST START
Insert 3 pieces 1.5VAA battery to the detector, the buzzer will make a sound”di”, the detector starting preheating, It will display 2 minutes counting when the detector is in starting-up.
2.BUTTON
Press”TEST” button,LCD display “CO Oppm”,and then smoke “0.00db/m”, LED flickering and the detector will sound continuous alarm.
3.PEAK RECOBD
Press”TEST”button.check alarm concentration long ress”TEST button for more than 10 seconds again for dean up.
4.INDICATION LIGHT
Under the normal standby situation, the green ligh lashes one time at every 35 seconds.
5.LOWBATTERY WARNING
When the battery capacity is low, the red light flashesone time at every 10 seconds, and the LCD display”Lb”.
6.ALARM
CO:EN50291
|
Standard: EN50291-1:2018 |
50ppm, alarm within 60-90 minutes |
| 100ppm, alarm within 10-40 minutes | |
| 300ppm, alarm within 3 minutes | |
| over 300ppm,alarm immediately |
the buzzer will make sound “di”four times at every 5 seconds, the red light flashes, and continue alarm. please immediately turn off the valve, open the windows and doors, then call your emergency service.
Smoke:EN14604
If there is a fire, when the unit detect the smoke concentration over than 0.1%db/m,it will alarming the blue light flash rapidly and the buzzer continue alarm.
| Working voltage: | DC4.5V (3pcs AA battery) |
| Standby current: | <20uA |
| Alarm currect | <50mA |
| Warming time: | 2 minutes |
| Pressure: | 86kPA~106kPA |
| Inspection gas: | smoke;carbon monoxide |
| Detecting: | Smoke over than 0.1%db/m
CO alarm over 200×10-6 |
| User environment: | temperature: -10°C~55°C ;Relative humidity:<95% without crystallization; |
| Alarm type : | sound and light alarming |
| Alarming volume: | >80dB (at three meter directly in front) |
| Sensor: | infrad sensor&electrochemical sensor |
| Weight: | about 180g |
| Dimensions: | 104*104*39mm |
| Shell protection grade: | IP30 |
|
Certificates |
EN50291 |
| EN14604 | |
| IEC62321-1:2013 | |
| EN55014-1:2017 |
This machine has been calibrated before leaving the factory. You only need to clean the housing of the detector frequently during use to ensure that the hole in the front of the detector is not blocked by dirt or dust .
Basically, no other maintenance is required. When cleaning the detector housing, please use a clean soft brush or dry flannel to wipe, do not use detergent, bleaching powder or polish.
During the working process of the detector, a self-checking test is carried out every minute.
Under normal use, the detector can operate for 5 years. When the detector sends out an end-of-life signal (the buzzer beeps once every minute), the detector must be replaced. If the detector reaches the end of its life, please follow local regulations for disposal.
This product is designed for indoor use only. Please avoid the detector from being exposed to rain or moisture, and avoid dropping the detector. Do not knock, open or modify the detector, otherwise it may cause the product to malfunction.
Covering the detector, improper use or maintenance may reduce or lose the detection function.
What certificates do you have on smoke+CO Alarm?
We have full CE/RoHS certificates asEN50291,related to CE Directive(s) R305/2011,EN14604,EN62368-1:2014+A11:2017,etc
How you make sure smoke+CO alarm’s calibration is set?
We have gas calibrators both for sample and mass production,The calibration team have 5 employees aim to make sure the alarms are set.
What kind of sensor do you apply in smoke+CO alarms?
Most of our carbon monoxide alarm use infrad&electrochemical sensors,3~5 years life,5~7 years life and 10 years life.
What language you can offer for VOICE alarm?
Standard language is English,We have experience make Japanese,Spanish,Germany,Russia,etc.You can offer us some audio data if you have.
Can I make my own logo and color box?
Sure,OEM/ODM are welcome but need MOQ at 500pcs,All cost are pree include logo printing,color box designning or even language customization.
What is your lead time?
Sample can be ready in 3 days.Mass production need one week when quantity lower 2000pcs,we need add more three days if you have OEM requirement.
What if I need return the goods,Who pay the shipping fee?
All our products enjoy 12 months’ quality warranty.In this period, We here ensure you that goods can be returned and we will cover the shipping fee if the alarms not working because of the less in quality.
coming soon
Want To Know More About Our Alarms Quote or Shipping Methods,Link Us!
Symank Offer You The Best Domestic/Industrial Gas Detectors In One-Stop Solution.
Products
Copyright © 2022 - 2026 SYMANK Alarms
Get A Quote
Quality, credit, service – we promise you always!
We respect your confidentiality and all information are protected.