CO Alarm JKD-WIFI-CO Introduction

This wifi carbon monoxide detector (hereinafter referred to as the detector) is made of high-quality electrochemical sensors, combined with advanced electronic technology and sophisticated technology, and has the advantages of stable operation and long service life.

It can be placed on a desktop, ceiling or wall hanging this installation method is simple to install and easy to use.

In the place where carbon monoxide gas exists, once the concentration of carbon monoxide gas reaches the alarm setting value, the detector will send out an audible and visual alarm signal to remind you to take effective measures quickly, so as to effectively avoid fire, explosion, suffocation, death and other vicious accidents.

Use Guide

1. Download the APP【Tuya Smart】, download it from the app market or scan the code to download it.

2、Register an account
Open the main page of the APP
(1) Find the device network distribution button, press and hold for 3-5s until the green light flashes.

(2) On the Tuya APP interface on the mobile phone, choose to add a device, or automatically discover the device (need to turn on Bluetooth)

(3) Wait for the device to connect, you need to enter the current WIFI name and password during the process, and then wait for the pairing to succeed

(4) After success, you can see the paired devices on the main page

Precautions

This machine has been calibrated before leaving the factory. during use, you only need to clean the detector casing frequently to ensure that the holes in front of the detector are not blocked by dirt or dust, and basically no other maintenance is required.

When cleaning the detector housing, please use a clean soft brush or dry flannel to wipe, do not use detergent, bleach or polish.

End of detector life

During the working process of the detector, a self-checking test is performed every minute.
Under normal use, the detector can operate for 3 years. The detector must be replaced when the detector signals its end of life (beeper briefly beeps once per minute).

If the detector reaches the end of its life, please dispose of it in accordance with local regulations.

WARNING!

This product is designed for indoor use only, please keep the detector away from rain or moisture, and avoid dropping the detector, and do not knock, open or modify the detector, otherwise it may cause the product to malfunction. Covering the detector, improper use or maintenance may reduce or lose detection function.

Please do not place detectors in the following places:

• outside the building;
• In or under the cupboard;
• In a damp or wet area;
• Directly above the sink or cooker;
• Near doors and windows or anywhere that may be affected by airflow, such as exhaust fans or air vents;
• Where the airflow to the detector may be blocked by curtains or furniture;
• Where dirt or dust may accumulate to block the detector and prevent it from working;
• In a location where the temperature may drop below -10°C or rise above 55°C;
• Where it is susceptible to being bumped, damaged or inadvertently moved.

Kindly notice.

Installation Locations:

Ideally, a detector is recommended in every room with fuel-using appliances. But if there is more than one burner and the number of detectors is limited, the following points need to be considered when determining the location:

• The bedroom has burning appliances, a detector needs to be installed in the bedroom;
• If there is a chimneyless or ordinary flue type burning appliance in the room, a detector needs to be installed in the room;
• If there are electrical appliances in a room that is used more, such as a living room, a detector needs to be installed in the room;
• In a bedroom-cum-living room, detectors should be kept as far away as possible from cooking utensils and sleeping areas;
• If the appliance is in an infrequently used room, such as a boiler room, the detector needs to be installed outside the room so that the alarm can be easily heard.

What certificates do you have on Carbon Monoxide Alarm?

We have full CE/RoHS certificates as EN50291-1:2018,Product will be marked before shipping,The test institution by INTERTEK & TUV.

How you make sure CO alarm’s calibration is set?

We have CO calibrators both for sample and mass production,The calibration team have 5 employees aim to make sure the alarms are set.

What kind of sensor do you apply in CO alarms?

Most of our carbon monoxide alarm use electrochemical sensors,3~5 years life,5~7 years life and 10 years life,We have more advanced sensor applied in industrial gas detector.

What language you can offer for VOICE CO alarm?

Standard language is English,We have experience make Japanese,Spanish,Germany,Russia,etc.You can offer us some audio data if you have.

Can I make my own logo and color box?

Sure,OEM/ODM are welcome but need MOQ at 500pcs,All cost are pree include logo printing,color box designning or even language customization.

What is your lead time?

Sample can be ready in 3 days.Mass production need one week when quantity lower 2000pcs,we need add more three days if you have OEM requirement.

What if I need return the goods,Who pay the shipping fee?

All our products enjoy 12 months’ quality warranty.In this period, We here ensure you that goods can be returned and we will cover the shipping fee if the alarms not working because of the less in quality.

coming soon