Training Center
01
How to Maintain&Use?
1.Avoid installations in places with stagnating smoke, heavy dust, heavy water mist, heavy oil mist, great humidity(95%) and high wind speed(>5m/s)
2. Insert the ready battery into the battery cabinet, notice the place of anode and cathode.
3. Choose a proper position. Normally, the center of the detection area ceiling is recommended. Fix the detector base into the chosen position Then put the detector into the base and twist to fasten it. Be sure it is fastened tightly.
4.Click our VIDEO left to find more!
02
Where to Install?
•If the bedroom has a burning appliance, you need to install a detector in the bedroom;
•If there is a chimney-free or common flue gas appliance in the room, a detector must be installed in the room;
•If there is an electric appliance in a more-used room, such as a living room, a detector needs to be installed in the room;
•In a bedroom and living room, the detector should be as far away from cooking appliances and sleeping areas as possible;
*For more information,Check our Video Channel👉
03
two in one,how work?
When test CO,the buzzer will make sound “di”four times at every 5 seconds, the red light flashes, and continue alarm.
When test smoke,it will alarming the blue light flash rapidly and the buzzer continue alarm.
Please also make sure to clean the housing of the detector frequently during use to ensure that the hole in the front of the detector is not blocked by dirt or dust .
04
How often change battery?
For Carbon-zinc-battery,we advise you change battery half-year.For Alkaline battery,Change them once per year.
If you hate to changing batteries,We can customize 10-YEARS Lithium battery to operate this alarm,which you can consult us engineer: [email protected]
05
What's special in Plug-in CO alarm?
With Plug-in type,you don’t need to worry about changing batteries that often,90~240V supported and we have UK/EU/AM type plug available.
*Plug the alarm and we need to wait 2 minutes’ countdown before working,Meantime the light flashs,when it is working,the green light keep on.
*Press the TEST/RESET button, LCD screen light and show””, the red light flash, the detector continuous alarm at the same time.